AudioCodes MP-204B User Manual download pdf (Page 10)

5. Submit

Backing up the Configuration

It is important to back up the system configuration once the gateway is configured.

Go to Maintenance. Click Save Configuration to save all the changes.

Go to Advanced Configuration -> Configuration File and get the .ini file. Store the configuration file in

a safe place.

Configuring the NetVanta UC Server

After the gateway is added to your network, the UC server must be configured to handle incoming and

outgoing phone calls.

These instructions are for Release 4.1 of the UC server. Start the UC client.

Adding a Trunk Identity

1. Go to Identities.

2. Right-click in the right panel and select New Identity.

3. In the first page of the Wizard, select an Attendant identity. Ensure that the Identity is associated

with the Admin profile.

4. On the following page, enter a descriptive name and enter 10000 for the Address (assuming a

standard configuration). Ensure that Default Trunk Service is the service to be run.

Adding a SIP Gateway

1. Select Gateways.

2. Right-click in the right panel and select New Gateway.

3. Choose Public Switched Telephone Network (PSTN) from the list of gateway choices.

4. In the Host name field, enter the IP address of the gateway.

5. Enter a descriptive name for the gateway.

6. Save.

Dial Plan

Incoming calls from the PSTN are already configured by having incoming calls routed to the 10000

Trunk identity. An entry or entries must be entered in the Dial Plan for outgoing calls to the PSTN.

1. Go to Communication Service -> UC Server -> Routing.

2. There are many possibilities here. If regular PSTN calls are to be routed out the gateway, add or

modify an entry where the Original Digits are [0-9]{7,} and select the Vega gateway. For

example:

1 2 ... 5 6 7 8 9 10 11

No comments

AudioCodes MP-204B User Manual Page 10